NexPro-Link
OEM Available
NX-MD-4G5G01 4G/5G Mobile Network Device Detection Unit - primary view
Original uncropped source image bound to NX-MD-4G5G01 from physical page 20.
NX-MD-4G5G01

4G/5G Mobile Network Device Detection Unit

A mobile-network device detection unit for scanning, identifier detection and controlled network management. The documented platform supports multiple radio access technologies and synchronisation methods.

ModelNX-MD-4G5G01
Supported bandsLTE:B1、B3、B5、B8、B34、B38、B39、B40、B41;NR:N1、N3、N5、N8、N28、N41、N78、N79 (supports700 MHz--4.9GHzall bands within)
Radio access technologiesNR and LTE
Published operating rangeApproximately 100 m
Concurrent carriersUp to 14 concurrent carriers; non-scanning; 5G/4G carrier separation
MOQConfirm by model, quantity and configuration
Lead TimeConfirm after technical scope review
FOB PortChina main ports
OEM / OptionsReview Model Scope
Request QuotationRequest Datasheet

Product features

Key Product Characteristics

Source-supported characteristics for model selection and technical discussion.

Feature 01

Exact-model configuration: 4G/5G detection unit

Feature 02

NR and LTE radio access technologies

Feature 03

Up to 14 concurrent carriers without scanning

Feature 04

Published operating support across 700 MHz to 4.9 GHz bands

Feature 05

GPS, BeiDou and over-the-air synchronisation

Full Specifications

NX-MD-4G5G01 - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.

Engineering data sheet

NX-MD-4G5G01 technical review record

Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.

Model / schedule code
NX-MD-4G5G01
Product family
security-inspection-perimeter
Typical application
Controlled facilities / Network-device detection
Technical status
Final submittal required
1. Product Identification2. Published Technical Data 343. Project Supply & Technical Confirmation
ParameterSpecified valueUnit / standardEngineering verification
NexPro modelNX-MD-4G5G01—Confirm the current model revision in the final technical submittal before purchase order.
Product familyMobile Device Detection—Confirm the current model revision in the final technical submittal before purchase order.
Configuration4G/5G detection unit—Confirm the current model revision in the final technical submittal before purchase order.
Source evidenceSupplier catalog physical page 20—Confirm the current model revision in the final technical submittal before purchase order.
Parameter scopeVariant-specific where explicitly separated; otherwise series-level published data—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
Supported bandsLTE:B1、B3、B5、B8、B34、B38、B39、B40、B41;NR:N1、N3、N5、N8、N28、N41、N78、N79 (supports700 MHz--4.9GHzall bands within)—Confirm the current model revision in the final technical submittal before purchase order.
Radio access technologiesNR and LTE—Confirm the current model revision in the final technical submittal before purchase order.
Published operating rangeApproximately 100 mmConfirm the current model revision in the final technical submittal before purchase order.
Concurrent carriersUp to 14 concurrent carriers; non-scanning; 5G/4G carrier separation—Confirm input supply, polarity and backup sizing against the project electrical design.
Power inputPower bank or direct DC input—Confirm input supply, polarity and backup sizing against the project electrical design.
SynchronizationGPS, BeiDou or over-the-air synchronization—Confirm the current model revision in the final technical submittal before purchase order.
AntennaIntegrated PCB antenna—Confirm the current model revision in the final technical submittal before purchase order.
Output power10-15dBmdepending on band—Confirm input supply, polarity and backup sizing against the project electrical design.
Dimensions255 x 200 x 86 mmmmVerify against the approved drawing, opening direction and installation conditions.
Receiver sensitivityapproximately -103 dBm—Confirm the current model revision in the final technical submittal before purchase order.
Weight3.5 kgkgVerify against the approved drawing, opening direction and installation conditions.
Operating modesfrequency scan、identifier detection、control—Confirm the current model revision in the final technical submittal before purchase order.
Operating environment-20-50°C—Confirm the operating environment and required protection level for the installation site.
ParameterSpecified valueUnit / standardEngineering verification
ModelNX-MD-4G5G01SKUUse the exact model code on drawings, BOQ, quotation and purchase order.
Product familysecurity-inspection-perimeterCategoryConfirm the selected family matches the complete system architecture.
Typical applicationsControlled facilities, Network-device detection, Security operationsApplicationValidate suitability against the actual site workflow and environment.
MOQConfirm by model, quantity and configurationOrderConfirm by final model mix, finish and customization scope.
Lead timeConfirm after technical scope reviewScheduleReconfirm after sample approval and before project delivery planning.
FOB portChina main portsIncotermConfirm Incoterm, destination and consolidation plan in the quotation.
OEM / ODMAvailableSupplyConfirm logo, finish, packaging, labels, manuals and firmware scope where applicable.
RFQ confirmationConfirm site dimensions, operating environment and control interfaces before order.ProjectInclude this item in the technical clarification record.
RFQ confirmationSeries-level published data must be reconfirmed for the selected exact configuration.ProjectInclude this item in the technical clarification record.
RFQ confirmationFinal compliance, impact, detection and range claims require approved project submittal evidence.ProjectInclude this item in the technical clarification record.

Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.

Technical Confirmation & Project Supply

Move from the website record to a controlled technical clarification, exact configuration and commercial quotation without assuming unconfirmed certifications or performance data.

Controlled Source Record

Model / SKU
NX-MD-4G5G01
Image evidence
1 bound source image
Technical data
Source values retained; final submittal required
Request Product Documents

RFQ Technical Inputs

  • Confirm site dimensions, operating environment and control interfaces before order.
  • Series-level published data must be reconfirmed for the selected exact configuration.
  • Final compliance, impact, detection and range claims require approved project submittal evidence.

Quotation Handoff

Quantity basis
Confirm by model, quantity and configuration
Schedule
Confirm after technical scope review
Shipping term
China main ports
Send Technical RFQ

Related Products in This Series

Compare source-bound product images and adjacent configurations from the same documented series before widening the selection.

Engineering Buyer FAQ

Source-controlled answers for model selection and RFQ preparation.

Provide the exact model, quantity, site layout, power, interfaces, environmental conditions and destination.

They support preliminary selection. Final values are confirmed in the approved project technical submittal.

Ready to Start Your Project?

Get a Project Supply Quotation for NX-MD-4G5G01

Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.

Request Quotation

Send your model list, quantity and destination for a reviewed quotation.

Start RFQ

Request Datasheet

Full technical specs, dimensions and available model-level documents for tender prep.

Request Datasheet

Request a Call

Send your preferred time and discussion scope for a technical call request.

Request Call
Model-Matched Project Supply
Model-Level Documents
FOB China Main Ports
Catalog Chat