NexPro-Link

Government Building Security and Command Center Solution

Prepare a model-specific public-building security package for visitor entrances, restricted areas, CCTV recording and a professional video wall command center.

Government Building Security and Command Center Solution project equipment package scene
Primary zones

Visitor lobby, restricted areas and command center

Core systems

CCTV, access, NVR, video wall and UPS

Best starting file

Tender specification, I/O schedule or room layout

Review focus

Model compliance, system roles and submittal documents

What this project package covers

Prepare a model-specific public-building security package for visitor entrances, restricted areas, CCTV recording and a professional video wall command center.

The page is a procurement starting point, not a final engineering design. Model, quantity, interface and installation decisions are confirmed from the site drawing and equipment schedule.

Starting equipment scope

Face terminal optionPedestrian gateRFID workflowExit and door hardware scopeDome, bullet and PTZ options64CH NVRPoE aggregationStorage schedule

Who this package is for

Public-building contractorsTender equipment suppliersSecurity system integratorsCommand-center project buyers
Buyer and engineering priorities

What the Project Must Resolve

The page turns each issue into a defined system scope, product schedule and RFQ input instead of leaving the buyer with a generic product list.

Translate tender clauses into real models

Panel size, decoder outputs, camera channels, access workflow and documents must be mapped line by line.

Coordinate command-center system roles

Display panels, decoder, operator controls, NVR sources and network topology must be designed as one architecture.

Prepare a reviewable submittal

The buyer needs exact model names, parameters, drawings, datasheets and a list of project-specific clarifications.

System Scope by Module

Use these modules to turn a broad project scenario into a clearer equipment package and quotation request.

Entrance and visitor control

Controlled staff, visitor and restricted-area entrances.

Face terminal optionPedestrian gateRFID workflowExit and door hardware scope

CCTV and recording

Camera, NVR and network references for public and restricted zones.

Dome, bullet and PTZ options64CH NVRPoE aggregationStorage schedule

Command-center display

Reviewed display, decode and operator-control products.

NX-VP-5535 panelsNX-VD-4K16 decoderNX-PC-5S3 keyboardUPS and rack scope

Map the Project Zone by Zone

Each zone connects the operating requirement to verified product families and the site information still needed before model confirmation.

Zone 01

Visitor lobby

Verify visitors and monitor the public entrance without obstructing normal flow.

Equipment direction

Face terminal optionDome cameraPedestrian gate option

Confirm before RFQ

  • Visitor workflow
  • Lane count
  • Mounting and lighting
Zone 02

Restricted offices and archives

Document approved access method, door hardware and associated monitoring points.

Equipment direction

Access terminalCamera reference

Confirm before RFQ

  • Door count
  • Authentication method
  • Controller boundary
Zone 03

CCTV recording layer

Handle the approved camera schedule and retention requirement.

Equipment direction

64CH NVRPoE aggregation

Confirm before RFQ

  • Channel count
  • Resolution and bitrate
  • Retention days
Zone 04

Command center

Display multiple sources with a reviewed decoder, wall layout and operator-control plan.

Equipment direction

55-inch video wall4K decoderPTZ keyboard

Confirm before RFQ

  • Wall layout
  • Source and output schedule
  • Operator positions

Visual project reference

Review the operator display and signal-control layer

Command-room product and interface views make source, decoding and display responsibilities easier to confirm.

Supplier installation reference showing a multi-screen control roomApplication reference

Control-room display reference

Supplier installation reference used for scale and operator-context discussion, without a named project-delivery claim.

View details
NX-VD-4K16 video decoder productProduct reference

Video decoding hardware

Decoder reference for mapping approved CCTV and operator sources to the planned display outputs.

View details
NX-VP-5535 video processor interface layoutEquipment detail

Processor connection detail

Interface detail helps identify the required source formats, control links and cable schedule.

View details

Application scenes are visual references. Final models, quantities and interfaces follow the approved project information.

System Architecture and Responsibility

Use this flow to review how field devices, transmission, recording, operation and protected power fit together. Final interfaces remain project-specific.

01

Security inputs

Collect camera streams and approved access events.

IP camerasAccess terminalsNVR sources
02

Network and recording

Route, record and retain sources according to the approved schedule.

PoE and core network64CH NVR referenceStorage policy
03

Decode and display

Map source count and layouts to decoder modules and display outputs.

NX-VD-4K16NX-VP-5535Multi-window layouts
04

Operator and power layer

Provide operator control and protected power for the command center.

NX-PC-5S3Rack UPSCabinet and PDU review

Project boundary: Tender compliance, cybersecurity, authority approvals, data retention and final system integration are project-specific. NexPro-Link supplies model and document references but does not claim universal compliance with an unreviewed specification.

Package starting points

Choose a Scope, Then Confirm the Engineering Inputs

These packages organize procurement conversations. They are not fixed kits and do not replace a model-by-model review.

Option 1

Entrance and CCTV package

Public buildings without a dedicated video wall.

Included scope

  • Visitor entrance devices
  • Public-area CCTV
  • NVR and PoE

Still to confirm

Door workflowCamera countRetention policy
Most complete

Integrated command-center package

Buildings with centralized security operation.

Included scope

  • Entrance access
  • CCTV and NVR
  • NX-VP-5535 video wall
  • NX-VD-4K16 decoding
  • Operator keyboard and UPS

Still to confirm

Wall layoutI/O scheduleRack and power
Option 3

Tender submittal package

Pre-bid and approved-model review.

Included scope

  • Compliance matrix
  • Model links and datasheets
  • BOM clarification list
  • Packing and delivery inputs

Still to confirm

Mandatory clausesRequired formatsAlternative rules
Verified catalog mapping

Recommended Models and Selection Conditions

Every model below resolves to a current product record. Quantities and final configurations still follow the drawing, schedule and destination requirements.

LCD video wall panel
NX-VP-5535

By approved row × column layout

55 inches3.5 mm combined bezel1920 × 1080400 nit typical
Command centerConfirm wall structure, input plan and service clearance.
Network video decoder
NX-VD-4K16

By source and output schedule

5U modular chassisUp to 16 modules4K at 60 HzUp to 32 wall outputs
Command-center rackFinal module configuration follows the approved I/O matrix.
Operator keyboard
NX-PC-5S3

By operator position

5-inch displayUp to 999 devicesDC 12V / PoE
Operator deskConfirm controlled devices and network topology.
Network video recorder
NexPro-NVR8864-4K

By camera and retention schedule

64CH8-bayUp to 144TB
Security rackRecording architecture may require multiple units.
Entrance terminal
Face recognition optionPedestrian accessProject configured
Lobby and restricted entrancesConfirm reader, gate, controller and egress scope.
Rack UPS
NX-UP-RM-001

By rack load and runtime

1–10KVA900–9000WOnline double conversion
Command-center rackBattery configuration follows the required runtime.
5-inch Network PTZ Control KeyboardFactory model
NX-PC-5S3

5-inch Network PTZ Control Keyboard

A network PTZ control keyboard with a 5-inch display, four-axis joystick, video decoding and PoE support for surveillance operators.

5-inch 800 × 480Up to 999 devicesH.265 / H.264
NexPro F01/F02 - Face Recognition System F01/F02Factory model
NX-PA-017

NexPro F01/F02 - Face Recognition System F01/F02

Pedestrian Access Control : F01/F02. Specifications: 246mm (length) x 129mm (width) x 23mm (thickness) | Resolution: 1024x600 FHD screen | Processor: Rv1109 dedicated AI chip, 2 cores 1.5 GHZ.

Pedestrian Access ControlPedestrian ControlProject supply
Rack-Mounted Online UPS 1KVA-10KVA SeriesFactory model
NX-UP-RM-001

Rack-Mounted Online UPS 1KVA-10KVA Series

19-inch rack-mountable online UPS series with true double conversion. Five models from 1KVA to 10KVA for server cabinet and structured cabling integration.

Online Double Conversion1KVA-10KVA / 900W-9000WSingle phase

Selection Rules That Prevent BOM Gaps

Use the same criteria during design review, quotation comparison and purchase-order confirmation.

Rule 01

Tender compliance

Distinguish exact mandatory parameters from preferences and list every unresolved clause.

Rule 02

Video-wall I/O schedule

Match input sources, codecs, resolutions, window layouts, modules and physical outputs before choosing hardware.

Rule 03

Control-room layout

Confirm screen arrangement, viewing distance, maintenance clearance, rack location and operator positions.

Rule 04

Access and data governance

Confirm identity workflow, data responsibility, local approvals and system ownership with the project authority.

Government Building Security and Command Center Solution typical project package reference
Reference package, not a claimed customer case

Reference only: 3 × 3 display wall; source and output schedule remains project-specific

Typical 3 × 3 public-building command center

A procurement reference combining nine display panels, reviewed decoding, operator control, CCTV sources and protected rack power.

9 × NX-VP-5535 panels
NX-VD-4K16 decoder configuration
NX-PC-5S3 operator keyboard
64CH NVR reference
Access terminal and rack UPS options

The decoder module count, wall outputs, rack design and required certifications must be confirmed from the tender and room drawings.

View reference package

From Project File to Model-Matched Delivery

The workflow keeps engineering assumptions visible and makes the final quotation easier for contractors and procurement teams to review.

01 · Review

Create a tender compliance matrix

Separate confirmed parameters, acceptable alternatives and open clarification items.

02 · Map

Build the source and output schedule

Count camera sources, NVR outputs, decoder modules, wall screens and operator stations.

03 · Confirm

Check access and room constraints

Confirm entrance workflows, wall layout, rack space, power, network and maintenance access.

04 · Submit

Prepare model-level documents

Return datasheets, drawings, product links, BOM notes and identified project assumptions.

Project questions

Solution FAQ

These answers define the first procurement boundary. Final models and quantities are confirmed from the submitted project information.

Yes. Send the tender or specification. We can map confirmed catalog parameters, identify alternatives and list items that require clarification.

Quick Inquiry

This inquiry will be tagged for Government Building Security and Command Center Solution (government-building). Send the available project inputs and our team will return model recommendations and clarification points.

Catalog Chat