UPS and ELV Power Backup Solutions for Security and Network Systems

Size UPS topology, battery runtime, rack distribution and monitoring from the actual CCTV, access, network or control-room load schedule.

Send BOQ for Review

UPS and rack power equipment for CCTV, ELV and network backup systems

System definition

ELV backup power is a load-and-runtime system, not a nominal kVA line

A useful UPS design begins with the connected equipment list in watts or volt-amperes, the required backup duration and the site input and output conditions. Topology, battery format and capacity follow those inputs.

NexPro-Link reviews the UPS, batteries, rack distribution and monitoring scope against the protected CCTV, access, network or display equipment. Final electrical design and local installation remain with the appointed project engineer and contractor.

ELV equipment room with rack-mounted security systems, floor UPS units and organized network cabling — Conceptual engineering visual. UPS capacity, runtime, distribution and models remain subject to the approved load schedule.

Who this solution is for

Built for project teams that need a reviewable system

For integrators, electrical and ELV contractors, consultants and buyers sizing backup power for NVR cabinets, PoE networks, access systems, control rooms and equipment racks.

ELV and security integrators

Runtime-backed UPS sizing for active system loads.

Electrical contractors and consultants

Input, output, topology and distribution assumptions.

Project procurement teams

A matched UPS, battery, PDU and accessory quotation.

Problems this system solves

Resolve the engineering gaps before selecting hardware

These are the decisions a BOQ or source list has to answer before individual products become a coherent system.

Capacity is estimated from kVA alone

Backup time cannot be confirmed without the connected load, power factor assumptions, margin and required runtime.

Topology is chosen by price

Standby, line-interactive, online and three-phase systems protect different load profiles and site conditions.

Battery and distribution are overlooked

Built-in batteries, external packs, cabinets, rack PDU, sockets and monitoring all affect installation, shipping and operation.

System architecture

How the modules connect

Follow the operating path from the first project input through control, operation and protected infrastructure.

01
Site supply
The design starts with voltage, frequency, phase and input interface.
- Utility input
- Generator or bypass boundary
02
UPS conversion
The selected topology conditions or transfers the incoming power.
- Standby or line-interactive
- Online or three-phase
03
Battery reserve
Batteries support the target load for the reviewed runtime.
- Internal batteries
- External packs or cabinet
04
Rack distribution
PDU and circuit planning distribute the protected output.
- Rack PDU
- Socket and circuit schedule
05
Protected ELV loads
NVR, PoE, access, network and display loads receive the reviewed backup.
- Security equipment
- Network and control equipment

Functional modules

Equipment roles inside the coordinated scope

Each module has a distinct job and a defined set of inputs. The final quotation keeps those roles visible.

Load inventory

Every protected recorder, switch, controller, display and network device is listed.

Continuous load in W or VA
Startup and margin allowance
Critical and non-critical circuits
Growth reserve

UPS topology

Topology and phase are selected from load criticality and site supply.

DC mini backup
Line-interactive UPS
Online double conversion
Three-phase facility power

Battery and runtime

Battery format is chosen against the target minutes and installation constraints.

Built-in battery
External battery pack
Battery cabinet
Runtime assumptions

Distribution and monitoring

PDU, sockets and monitoring deliver and observe protected power.

Rack PDU
Input and outlet schedule
SNMP or dry-contact scope
Bypass and maintenance inputs

Visual project reference

Connect protected loads to the right UPS form

Application, product and test-area references make the AC, DC and runtime review easier to understand before sizing.

Conceptual network and telecom equipment environment protected by backup power — Network and telecom load context
Conceptual application reference; final protected loads, voltage and runtime come from the submitted equipment list.
View details

NX-UP-DC-002 compact DC mini UPS — Compact DC backup option
A current compact UPS reference for routers, ONT devices, cameras and other compatible DC loads.
View details

UPS units connected to load-bank test equipment at the source facility — Load-bank test-area reference
Supplier-facility reference for electrical test preparation; exact test scope is confirmed for the selected model and order.
View details

Application scenes are visual references. Final models, quantities and interfaces follow the approved project information.

Product database source

Verified current models for this system

These are selected current products from the NexPro-Link product database. They illustrate system roles; the final model mix follows the approved project inputs and compatibility review.

NX-UP-DC-002

DC Mini UPS 45W-120W Series

A current DC mini-UPS family for compatible low-power network or security devices after voltage, connector and real-load review.

Topology: DC UPS with Li-ion battery & POE
Power: 45W-120W
Phase: DC / USB / POE output

Review NX-UP-DC-002 engineering details

NX-UP-RM-001

Rack-Mounted Online UPS 1KVA-10KVA Series

A current rack-mounted online UPS family for NVR, network and control-room racks requiring double-conversion protection.

Topology: Online Double Conversion
Power: 1KVA-10KVA / 900W-9000W
Phase: Single phase

Review NX-UP-RM-001 engineering details

NX-UP-HF-001

High Frequency Online UPS 1KVA-10KVA Series

A current tower online family for critical ELV loads where rack installation is not required.

Topology: Online Double Conversion
Power: 1KVA-10KVA / 900W-9000W
Phase: Single phase

Review NX-UP-HF-001 engineering details

SP5181

SP5181 10 A basic switched rack PDU

A current basic rack PDU reference for distributing protected output after the input plug, current and outlet schedule are confirmed.

Input Current: 10 A
Input Cable: 3 m, conductor cross-section 1.5 mm²
Input Plug: 10 A Chinese-standard plug

Review SP5181 engineering details

Product category mapping

Connect system roles to real product families

These category links provide the full product and specification context. The solution page stays focused on how the equipment works together.

UPS Power

Project-configured UPS, DC backup, portable power, hybrid inverter and LiFePO4 energy storage systems for security, network, telecom, residential backup and industrial applications.

Explore UPS Power products 02

Rack PDU

23 model, product-group and intelligent-PDU series pages organized by outlet, protection, monitoring and installation requirements.

Explore Rack PDU products

Engineering and selection inputs

What to provide and what NexPro-Link checks

A useful review separates buyer inputs from compatibility checks so open assumptions are visible before quotation.

Project information to provide

01Complete protected-load list in W or VA
02Required backup time at the stated load
03Input and output voltage, frequency and phase
04Tower, rack or facility installation format
05Socket, plug, hardwire and PDU requirements
06Battery preference, room conditions and shipping destination

Compatibility review

UPS real-power capacity against load plus design margin
Battery configuration and runtime against the target minutes
Topology against load criticality and acceptable transfer behavior
Input voltage, phase and frequency against site supply
Output sockets and PDU against connected equipment
Battery type, weight and shipping restrictions against the project route

Starting configurations

Use a configuration as a review starting point

These are scope frameworks, not fixed kits. Quantities and models remain subject to the project drawing, BOQ and compatibility review.

CONFIG 01

Compact CCTV or access cabinet

Small NVR, PoE or controller cabinets requiring short interruption protection.

Protected-load list
Compact line-interactive or online reference
Outlet schedule
Runtime confirmation

Confirm before quotation: Confirm real watts, startup behavior, voltage, plugs and target minutes.

CONFIG 02

Rack control-room backup

Rack-mounted NVR, network and control equipment needing cleaner continuous power.

Rack-mounted online UPS
Battery-runtime review
Rack PDU
Monitoring option

Confirm before quotation: Confirm rack space, continuous load, PDU input, bypass needs and external battery scope.

CONFIG 03

Facility or multi-rack protection

Larger command rooms, server areas or site-wide critical loads.

Three-phase topology reference
External battery system
Distribution interface
Monitoring and service boundary

Confirm before quotation: A single-line diagram, load schedule, phase, redundancy and room conditions are required.

Technical submittal

Available technical documents

Document availability and revision are confirmed against the models included in the final quotation. The download center provides general selection forms and project checklists.

Open the technical download center

Current product references

UPS Datasheet
Source specification record
Project configuration checklist

Returned with project review

UPS selection and load-assumption sheet
Model and battery configuration quotation
Runtime basis for the stated load
UPS and PDU datasheets
Open electrical and installation clarifications

OEM / ODM scope

Customization follows the approved technical scope

Selected UPS and rack-power products can be reviewed for branding, labeling, outlet configuration, packaging and documentation.

Logo and model label

Plug and outlet schedule

Packing and manual language

Configured accessory list

Runtime remains load-dependent. Final electrical coordination, protection settings, cable sizing and local compliance require project-engineer approval.

Review OEM and ODM support

Related project applications

Industry pages keep the Project Supply intent separate while showing how this system is quoted in a real application.

Hotel & Hospitality project equipment supply School & Campus project equipment supply Government & Public Buildings project equipment supply Factories & Warehouses project equipment supply Shopping Malls & Retail project equipment supply

Related technical guides

Continue the engineering review

UPS Product and Selection CenterCompare current UPS topologies and product-series data.UPS Load Calculation SheetPrepare the connected-load and runtime inputs for review.BOQ & Tender SupportSubmit load schedules and single-line drawings with the project BOQ.

FAQ

Questions about UPS & ELV Power

Answers reflect NexPro-Link's equipment-supply and compatibility-review role; project-specific values remain subject to the final BOQ and approved models.

How do I size a UPS for CCTV or ELV equipment?

List every connected load in W or VA, required runtime, site voltage, phase, plug or hardwire interface and installation format. Add an explicit design margin rather than sizing at full continuous capacity.

When should a security system use online UPS?

Online double-conversion UPS is typically reviewed for control rooms, servers and critical equipment needing continuous conditioned output. The final choice depends on load behavior, site supply and acceptable transfer performance.

Can battery runtime be extended?

Yes. External battery packs or cabinets can extend runtime where the selected UPS supports them. Confirm the load, target minutes, room space, weight and shipping conditions.

Can NexPro-Link approve the final electrical design?

We provide product data, model matching and quotation support. Final cable sizing, protection, installation and local electrical compliance must be approved by the project's qualified electrical team.

BOQ / RFQ review

Send your UPS & ELV Power requirement

Share the BOQ, BOM, drawing or equipment schedule. NexPro-Link will review system roles, current models, compatibility assumptions and the coordinated supply scope.