NexPro-Link

Factory and Warehouse Security System with CCTV, Gates and UPS

Match perimeter and loading-area cameras, warehouse recording, vehicle access, rack power and project cabling for industrial security deployments.

Factory and Warehouse Security System with CCTV, Gates and UPS project equipment package scene
Primary zones

Perimeter, gates, loading, aisles and control room

Core systems

CCTV, NVR, PoE, LPR/barrier, racks and UPS

Best starting file

Site layout, camera points and gate schedule

Engineering focus

Distance, lighting, cable route, load and runtime

What this project package covers

Match perimeter and loading-area cameras, warehouse recording, vehicle access, rack power and project cabling for industrial security deployments.

The page is a procurement starting point, not a final engineering design. Model, quantity, interface and installation decisions are confirmed from the site drawing and equipment schedule.

Starting equipment scope

IP66 bullet camerasLong-range PTZYard and fence viewsNight-lighting reviewLoading baysWarehouse aislesDispatch entrancesNVR and PoE

Who this package is for

Industrial security integratorsWarehouse project contractorsFactory facility teamsCCTV, gate and UPS distributors
Buyer and engineering priorities

What the Project Must Resolve

The page turns each issue into a defined system scope, product schedule and RFQ input instead of leaving the buyer with a generic product list.

Monitor long and exposed areas

Perimeter, yard and loading zones require decisions about distance, night lighting, mounting, weather exposure and vehicle movement.

Control busy vehicle entrances

LPR, barrier speed, boom format, safety accessories and visitor workflow must fit the actual factory gate.

Protect distributed network cabinets

PoE distance, uplinks, rack layout, PDU, cable construction and UPS runtime need one reviewed infrastructure schedule.

System Scope by Module

Use these modules to turn a broad project scenario into a clearer equipment package and quotation request.

Perimeter and yard monitoring

Outdoor bullet and PTZ options for large industrial zones.

IP66 bullet camerasLong-range PTZYard and fence viewsNight-lighting review

Warehouse and loading monitoring

Fixed cameras and recording for approved operational areas.

Loading baysWarehouse aislesDispatch entrancesNVR and PoE

Gate, rack and power

Vehicle access and protected security infrastructure.

LPR and barriersRack cabinet and PDUOnline UPSProject cable schedule

Map the Project Zone by Zone

Each zone connects the operating requirement to verified product families and the site information still needed before model confirmation.

Zone 01

Perimeter and yard

Weather-resistant coverage selected from real distance, light and mounting conditions.

Equipment direction

4MP IP66 bullet cameraLong-range PTZ option

Confirm before RFQ

  • Target distance
  • Night lighting
  • Pole or wall mount
Zone 02

Vehicle gate

Identify vehicles and control the lane with reviewed safety accessories.

Equipment direction

NX-LP-010 LPRTK01 brushless barrier

Confirm before RFQ

  • Plate region
  • Boom length
  • Traffic cycle and safety
Zone 03

Loading bays

Monitor vehicle and handling activity with clear entry and dock views.

Equipment direction

IP66 bullet cameraPoE switch

Confirm before RFQ

  • Dock count
  • Vehicle path
  • Backlight and night light
Zone 04

Warehouse aisles and dispatch

Use approved indoor views and group devices by cabinet.

Equipment direction

Dome camera option24-port PoE

Confirm before RFQ

  • Aisle length
  • Ceiling and rack height
  • Cabinet position
Zone 05

Security rack

Record camera channels and protect network equipment with documented rack power.

Equipment direction

64CH NVRRack UPS

Confirm before RFQ

  • Channel count
  • Rack elevation
  • Connected load and runtime

Visual project reference

See the perimeter, long-range and protected-power layers

Industrial sites benefit from clear equipment references for open yards, warehouse interiors and the recording core.

NexPro bullet camera product for perimeter monitoringProduct reference

Perimeter camera form

Bullet-camera reference for boundary and loading areas, with final lens and illumination based on distance and light.

View details
NexPro 25-times optical zoom PTZ camera productProduct reference

Long-range PTZ option

PTZ reference for wide yards and long-range observation where a fixed view is insufficient.

View details
UPS units connected to load-bank equipment at the source facilitySource facility

Protected-power test reference

Supplier-facility reference supporting the UPS review for racks and recording equipment; exact test scope is model-specific.

View details

Application scenes are visual references. Final models, quantities and interfaces follow the approved project information.

System Architecture and Responsibility

Use this flow to review how field devices, transmission, recording, operation and protected power fit together. Final interfaces remain project-specific.

01

Perimeter and operational inputs

Capture approved fence, yard, gate, loading and warehouse views.

IP66 bullet camerasLong-range PTZIndoor dome options
02

Gate and distributed network

Control vehicle lanes and connect camera clusters.

LPR and barrier24-port PoEUplink and cable review
03

Recording and rack

Aggregate video and organize the security rack.

64CH NVRServer cabinetRack PDU
04

Power continuity

Protect recording and network equipment from the approved load list.

Rack online UPSBattery/runtime planCircuit and PDU schedule

Project boundary: Camera detection range, analytics, environmental suitability, gate safety, cable sizing and UPS runtime depend on site conditions and final engineering. Published catalog parameters must be checked against the installation design.

Package starting points

Choose a Scope, Then Confirm the Engineering Inputs

These packages organize procurement conversations. They are not fixed kits and do not replace a model-by-model review.

Option 1

Warehouse CCTV package

Indoor warehouse and loading-area monitoring.

Included scope

  • Fixed cameras
  • PoE switching
  • NVR and storage schedule

Still to confirm

Point listLightingRetention target
Most complete

Factory perimeter and gate package

Industrial sites with yards and controlled vehicle entrances.

Included scope

  • Bullet and PTZ cameras
  • LPR and barrier
  • 64CH recording reference
  • Rack UPS

Still to confirm

DistanceLane workflowNetwork topology
Option 3

Industrial infrastructure package

New-build or rack refresh projects.

Included scope

  • Security rack
  • PDU and cable scope
  • Online UPS
  • Zone-based BOM and packing

Still to confirm

Rack elevationPower circuitCable and delivery schedule
Verified catalog mapping

Recommended Models and Selection Conditions

Every model below resolves to a current product record. Quantities and final configurations still follow the drawing, schedule and destination requirements.

Perimeter bullet camera
NexPro-BL512D3-4MP-DIC

By perimeter and loading points

4MP24 LEDsIP66
Outdoor industrial zonesConfirm required view, distance and lighting.
Long-range PTZ
NexPro-PTL10-4MP-40X

By large-yard observation requirement

4MP40× zoom150 m IRAI tracking
Yard and perimeterMounting and real detection goals require review.
64CH NVR
NexPro-NVR8864-4K

By camera and retention plan

64CH8-bayUp to 144TB
Security rackFinal storage follows resolution, bitrate and retention.
PoE switch
NexPro SW-POE2426G

By camera cluster

24 PoE ports2 uplinksGigabit
Warehouse and yard cabinetsConfirm PoE power and uplink route.
Vehicle entrance
NX-LP-010 + NX-BG-040

By controlled lane

LPR optionBrushless DC barrierProject configured
Factory gateConfirm plate format, boom and safety accessories.
Rack UPS
NX-UP-RM-001

By connected rack load

1–10KVA900–9000WOnline
Security rackBattery and runtime are confirmed from the load list.
Rack-Mounted Online UPS 1KVA-10KVA SeriesFactory model
NX-UP-RM-001

Rack-Mounted Online UPS 1KVA-10KVA Series

19-inch rack-mountable online UPS series with true double conversion. Five models from 1KVA to 10KVA for server cabinet and structured cabling integration.

Online Double Conversion1KVA-10KVA / 900W-9000WSingle phase

Selection Rules That Prevent BOM Gaps

Use the same criteria during design review, quotation comparison and purchase-order confirmation.

Rule 01

Distance and night visibility

Use target distance, lighting and required identification detail to choose fixed or PTZ products.

Rule 02

Gate duty and safety

Confirm boom format, open/close cycle, vehicle detection and safety devices for each lane.

Rule 03

Network and cable route

Review PoE distance, uplinks, fiber, outdoor cable conditions and cabinet locations.

Rule 04

Rack power and runtime

Provide the rack elevation, PDU outlets, connected watts and required backup time.

Factory and Warehouse Security System with CCTV, Gates and UPS typical project package reference
Reference package, not a claimed customer case

Reference only: camera, gate, rack and power quantities follow the site survey

Typical factory perimeter and warehouse package

A reference package for vehicle gates, yard perimeter, loading bays, warehouse aisles and one security rack.

4MP IP66 bullet cameras
40× long-range PTZ option
NX-LP-010 and TK01 barrier references
64CH NVR and 24-port PoE
Rack-mounted online UPS

Detection performance, cabling, barriers and power must be confirmed against the industrial site conditions and local safety design.

View reference packageView reference package

From Project File to Model-Matched Delivery

The workflow keeps engineering assumptions visible and makes the final quotation easier for contractors and procurement teams to review.

01 · Survey

Mark distance, light and traffic conditions

Document perimeter length, gate traffic, loading activity, mounting points and night lighting.

02 · Match

Build camera and entrance schedules

Choose fixed or PTZ cameras, NVR capacity, PoE groups, LPR and barrier models.

03 · Engineer

Review network, rack and power

Confirm cable routes, uplinks, rack depth, PDU outlets, connected load and backup time.

04 · Stage

Pack by zone or construction package

Align model labels, accessories and delivery groups with the installer sequence.

Project questions

Solution FAQ

These answers define the first procurement boundary. Final models and quantities are confirmed from the submitted project information.

IP66 bullet cameras are a starting point for outdoor zones, while long-range PTZ or indoor dome options depend on distance, light, mounting and the required evidence view.

Quick Inquiry

This inquiry will be tagged for Factory and Warehouse Security System with CCTV, Gates and UPS (factory-warehouse). Send the available project inputs and our team will return model recommendations and clarification points.

Catalog Chat