NexPro-Link
OEM Available
NX-XR-5030C X-Ray Security Inspection Scanner 5030C - primary view
Original uncropped source image bound to NX-XR-5030C from physical page 12.
NX-XR-5030C

X-Ray Security Inspection Scanner 5030C

An X-ray baggage inspection platform for checkpoint and public-venue screening. The documented configurations provide different tunnel sizes while retaining the published imaging and generator data.

ModelNX-XR-5030C
Maximum conveyor load200 kg (uniformly distributed)
System noise<54 dB
Wire resolution0.0787 mm diameter single solid copper wire
Conveyor speed0.22-0.5 m/s

Selection options

Same Series Size Options

3 options

Open another same-series model to compare its exact image and specifications.

lufei-20260316-p12-x-ray-security-scanner-5030a

X-Ray Security Inspection Scanner 5030A

Model
NX-XR-5030A
Maximum conveyor load
200 kg (uniformly distributed)

lufei-20260316-p12-x-ray-security-scanner-5030c

X-Ray Security Inspection Scanner 5030C

Model
NX-XR-5030C
Maximum conveyor load
200 kg (uniformly distributed)

lufei-20260316-p12-x-ray-security-scanner-6550c

X-Ray Security Inspection Scanner 6550C

Model
NX-XR-6550C
Maximum conveyor load
200 kg (uniformly distributed)
MOQConfirm by model, quantity and configuration
Lead TimeConfirm after technical scope review
FOB PortChina main ports
OEM / OptionsReview Model Scope
Request QuotationRequest Datasheet

Product features

Key Product Characteristics

Source-supported characteristics for model selection and technical discussion.

Feature 01

Exact-model configuration: 5030C configuration

Feature 02

Published conveyor load up to 200 kg when uniformly distributed

Feature 03

Published 0.0787 mm single copper-wire resolution

Feature 04

Adjustable conveyor speed from 0.22 to 0.5 m/s

Feature 05

Multi-energy 24-bit L-shaped photodiode detector

Full Specifications

NX-XR-5030C - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.

Engineering data sheet

NX-XR-5030C technical review record

Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.

Model / schedule code
NX-XR-5030C
Product family
security-inspection-perimeter
Typical application
Baggage screening / Logistics checkpoints
Technical status
Final submittal required
1. Product Identification2. Published Technical Data 18 (Series)3. Published Technical Data 19 (Series)4. Published Technical Data 20 (Series)5. Project Supply & Technical Confirmation
ParameterSpecified valueUnit / standardEngineering verification
NexPro modelNX-XR-5030C—Confirm the current model revision in the final technical submittal before purchase order.
Product familyX-Ray Security Inspection—Confirm the current model revision in the final technical submittal before purchase order.
Configuration5030C configuration—Confirm the current model revision in the final technical submittal before purchase order.
Source evidenceSupplier catalog physical page 12—Confirm the current model revision in the final technical submittal before purchase order.
Parameter scopeVariant-specific where explicitly separated; otherwise series-level published data—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
Maximum conveyor load200 kg (uniformly distributed)kgConfirm the current model revision in the final technical submittal before purchase order.
System noise<54 dBdBConfirm the current model revision in the final technical submittal before purchase order.
Wire resolution0.0787 mm diameter single solid copper wiremmValidate capacity against the final device count, retention target and system design.
Conveyor speed0.22-0.5 m/smConfirm the current model revision in the final technical submittal before purchase order.
Film safetyPublished as safe for ISO 1600 film—Confirm the current model revision in the final technical submittal before purchase order.
Operating temperature / humidity0°C to +45°C / 20%-95% RH, without cooling equipment—Confirm the operating environment and required protection level for the installation site.
Storage temperature / humidity40°C to +60°C / 20%-95% RH (source catalog text)—Confirm the operating environment and required protection level for the installation site.
ParameterSpecified valueUnit / standardEngineering verification
Steel penetration14 mm steelmmConfirm the current model revision in the final technical submittal before purchase order.
Tube voltage100--140 kV (adjustable)—Confirm input supply, polarity and backup sizing against the project electrical design.
Tube current0.4-1.2 mA (adjustable)mAConfirm input supply, polarity and backup sizing against the project electrical design.
Leakage dose rate<0.09 µGy/h—Confirm the current model revision in the final technical submittal before purchase order.
Power consumption1.5 kW, published valuekWConfirm input supply, polarity and backup sizing against the project electrical design.
Operating voltage220 VAC (±10), 50 ±3 HzVACConfirm input supply, polarity and backup sizing against the project electrical design.
X-ray beam angle80°—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
Monitor19-inch high-resolution LCD—Confirm the current model revision in the final technical submittal before purchase order.
Grey levels4096—Confirm the current model revision in the final technical submittal before purchase order.
Beam directionTop-down—Confirm the current model revision in the final technical submittal before purchase order.
Image resolution1920 x 1080—Validate capacity against the final device count, retention target and system design.
Cooling / duty cycleSealed oil cooling / 100% duty cycle—Confirm the current model revision in the final technical submittal before purchase order.
X-ray detectorL-shaped photodiode array detector, multi-energy, 24-bit depth—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
ModelNX-XR-5030CSKUUse the exact model code on drawings, BOQ, quotation and purchase order.
Product familysecurity-inspection-perimeterCategoryConfirm the selected family matches the complete system architecture.
Typical applicationsBaggage screening, Logistics checkpoints, Public venuesApplicationValidate suitability against the actual site workflow and environment.
MOQConfirm by model, quantity and configurationOrderConfirm by final model mix, finish and customization scope.
Lead timeConfirm after technical scope reviewScheduleReconfirm after sample approval and before project delivery planning.
FOB portChina main portsIncotermConfirm Incoterm, destination and consolidation plan in the quotation.
OEM / ODMAvailableSupplyConfirm logo, finish, packaging, labels, manuals and firmware scope where applicable.
RFQ confirmationConfirm site dimensions, operating environment and control interfaces before order.ProjectInclude this item in the technical clarification record.
RFQ confirmationSeries-level published data must be reconfirmed for the selected exact configuration.ProjectInclude this item in the technical clarification record.
RFQ confirmationFinal compliance, impact, detection and range claims require approved project submittal evidence.ProjectInclude this item in the technical clarification record.

Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.

Technical Confirmation & Project Supply

Move from the website record to a controlled technical clarification, exact configuration and commercial quotation without assuming unconfirmed certifications or performance data.

Controlled Source Record

Model / SKU
NX-XR-5030C
Image evidence
1 bound source image
Technical data
Source values retained; final submittal required
Request Product Documents

RFQ Technical Inputs

  • Confirm site dimensions, operating environment and control interfaces before order.
  • Series-level published data must be reconfirmed for the selected exact configuration.
  • Final compliance, impact, detection and range claims require approved project submittal evidence.

Quotation Handoff

Quantity basis
Confirm by model, quantity and configuration
Schedule
Confirm after technical scope review
Shipping term
China main ports
Send Technical RFQ

Related Products in This Series

Compare source-bound product images and adjacent configurations from the same documented series before widening the selection.

Engineering Buyer FAQ

Source-controlled answers for model selection and RFQ preparation.

Provide the exact model, quantity, site layout, power, interfaces, environmental conditions and destination.

They support preliminary selection. Final values are confirmed in the approved project technical submittal.

Ready to Start Your Project?

Get a Project Supply Quotation for NX-XR-5030C

Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.

Request Quotation

Send your model list, quantity and destination for a reviewed quotation.

Start RFQ

Request Datasheet

Full technical specs, dimensions and available model-level documents for tender prep.

Request Datasheet

Request a Call

Send your preferred time and discussion scope for a technical call request.

Request Call
Model-Matched Project Supply
Model-Level Documents
FOB China Main Ports
Catalog Chat