NexPro-Link
LS8113 Catalog Configuration A / 2.5 mm² Conductors product image
LS8113 main product image

Source product views, construction details and diagrams are kept together as product evidence, not separate SKUs.

LS8113

LS8113 Basic Switched Rack PDU

2 documented configurations are consolidated on this product-group page so buyers can compare specifications without duplicate catalog cards.

Configurations2
Input Current10 A
Conductor Cross-Section2.5 mm² (catalog unit normalized for website display)
MOQConfirm by model and project quantity
Lead TimeConfirm after configuration review
FOB PortConfirm in project quotation
OEM / OptionsConfirm Availability
Request QuotationDownload Datasheet · DOCX

One product family, exact configurations

Select the Exact Model for Your RFQ

Compare the documented installation formats on one page. Shared technical parameters are listed once below, while each quoteable model keeps its own identity and uncropped product image.

2 exact models
LS8113 Catalog Configuration A / 2.5 mm² Conductors

Exact model

LS8113

Catalog Configuration A / 2.5 mm² Conductors

Input Current
10 A
Conductor Cross-Section
2.5 mm² (catalog unit normalized for website display)
Input Plug
10A Chinese-standard plug
Input Cable
Not specified
Request quote for LS8113
LS8113 Catalog Configuration B / 2 m Cable / Double-Pole Switch

Exact model

LS8113

Catalog Configuration B / 2 m Cable / Double-Pole Switch

Input Current
10 A
Conductor Cross-Section
Not specified
Input Plug
10A Chinese-standard plug
Input Cable
2 m, 1.5 mm²
Request quote for LS8113

Full Specifications

LS8113 - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.

Engineering data sheet

LS8113 technical review record

Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.

Model / schedule code
LS8113
Product family
pdu-power-distribution
Typical application
Network racks / Security equipment cabinets
Technical status
Final submittal required
1. Source Technical Data2. Source Control3. Project Supply & Technical Confirmation
ParameterSpecified valueUnit / standardEngineering verification
Input Current10 AAConfirm input supply, polarity and backup sizing against the project electrical design.
Conductor Cross-Section2.5 mm² (catalog unit normalized for website display)—Confirm the current model revision in the final technical submittal before purchase order.
Input Plug10A Chinese-standard plug—Confirm the current model revision in the final technical submittal before purchase order.
Function ModuleSwitch protection—Confirm the current model revision in the final technical submittal before purchase order.
Output8 × 10 A new Chinese-standard outletsAConfirm the current model revision in the final technical submittal before purchase order.
Rated Load2500 WWConfirm the current model revision in the final technical submittal before purchase order.
Dimensions485 × 44.5 × 44.5 mmmmVerify against the approved drawing, opening direction and installation conditions.
ParameterSpecified valueUnit / standardEngineering verification
Website SKUSee documented configurations—Confirm the current model revision in the final technical submittal before purchase order.
Manufacturer modelLS8113—Confirm the current model revision in the final technical submittal before purchase order.
Product seriesBasic Switched Rack PDU Series—Confirm the current model revision in the final technical submittal before purchase order.
Entity typeProduct group with selectable configurations—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
ModelLS8113SKUUse the exact model code on drawings, BOQ, quotation and purchase order.
Product familypdu-power-distributionCategoryConfirm the selected family matches the complete system architecture.
Typical applicationsNetwork racks, Security equipment cabinets, IT equipment distributionApplicationValidate suitability against the actual site workflow and environment.
MOQConfirm by model and project quantityOrderConfirm by final model mix, finish and customization scope.
Lead timeConfirm after configuration reviewScheduleReconfirm after sample approval and before project delivery planning.
FOB portConfirm in project quotationIncotermConfirm Incoterm, destination and consolidation plan in the quotation.
OEM / ODMStandard supplySupplyConfirm logo, finish, packaging, labels, manuals and firmware scope where applicable.
RFQ confirmationConfirm the application, rack or room position, destination-market interface and mounting requirement.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm electrical, network, accessory or protection scope from the product family and project drawings.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm quantity, labeling, packing and required documents before purchase order.ProjectInclude this item in the technical clarification record.

Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.

Technical Confirmation & Project Supply

Move from the website record to a controlled technical clarification, exact configuration and commercial quotation without assuming unconfirmed certifications or performance data.

Controlled Source Record

Model / SKU
LS8113
Image evidence
3 bound source images
Technical data
Source values retained; final submittal required
Datasheet

LS8113 — Product Datasheet

Document language: English

Download DOCX3.9 MB
Series specifications

LS8113 + 2 models — Series Comparison

Document language: English

Download DOCX5.0 MB
Request Additional Documents

RFQ Technical Inputs

  • Confirm the application, rack or room position, destination-market interface and mounting requirement.
  • Confirm electrical, network, accessory or protection scope from the product family and project drawings.
  • Confirm quantity, labeling, packing and required documents before purchase order.

Quotation Handoff

Quantity basis
Confirm by model and project quantity
Schedule
Confirm after configuration review
Shipping term
Confirm in project quotation
Send Technical RFQ

Related Products in This Series

Compare source-bound product images and adjacent configurations from the same documented series before widening the selection.

Engineering Buyer FAQ

Source-controlled answers for model selection and RFQ preparation.

Provide the project application, cabinet or room layout, required interface, mounting condition, quantity and destination market for model confirmation.

Include the source SKU or target family, key specifications, installation environment, accessory scope, quantity, packing requirement and delivery destination.

Ready to Start Your Project?

Get a Project Supply Quotation for LS8113

Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.

Request Quotation

Send your model list, quantity and destination for a reviewed quotation.

Start RFQ

Request Datasheet

Full technical specs, dimensions and available model-level documents for tender prep.

Request Datasheet

Request a Call

Send your preferred time and discussion scope for a technical call request.

Request Call
Model-Matched Project Supply
Model-Level Documents
FOB China Main Ports
Catalog Chat