NexPro-Link
SP5082 16 A Chinese-standard input / 4000 W product image
SP5082 main product image

Source product views, construction details and diagrams are kept together as product evidence, not separate SKUs.

SP5082

SP5082 Surge-Protected Rack PDU

2 documented configurations are consolidated on this product-group page so buyers can compare specifications without duplicate catalog cards.

Configurations2
Input Current16 A
Input Cable3 m, 2.5 mm²

Selection options

Available Sizes & Configurations

2 options

Use the website SKU below when requesting a quote for a specific configuration.

SP5082-16A-CN-SPD-8OUT

16 A Chinese-standard input / 4000 W

Input Current
16 A
Input Cable
3 m, 2.5 mm²

SP5082-32A-INDUSTRIAL-SPD-8OUT

32 A industrial input / 6000 W

Input Current
32 A
Input Cable
3 m, 4 mm²
MOQConfirm by model and project quantity
Lead TimeConfirm after configuration review
FOB PortConfirm in project quotation
OEM/ODMContact Us
Request QuotationDownload Datasheet · DOCX

One model family, documented configurations

Select the Configuration for Your RFQ

These source configurations stay on one product-group page. Use the website SKU below in the quotation instead of treating each option as a separate product family.

Website SKU

SP5082-16A-CN-SPD-8OUT

Exact image

16 A Chinese-standard input / 4000 W

Input Current
16 A
Input Cable
3 m, 2.5 mm²
Input Plug
16A Chinese-standard plug

Website SKU

SP5082-32A-INDUSTRIAL-SPD-8OUT

Exact image

32 A industrial input / 6000 W

Input Current
32 A
Input Cable
3 m, 4 mm²
Input Plug
32A industrial plug

Full Specifications

SP5082 - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.

Engineering data sheet

SP5082 technical review record

Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.

Model / schedule code
SP5082
Product family
pdu-power-distribution
Typical application
Network racks / Security cabinets
Technical status
Final submittal required
1. Source Technical Data2. Source Control3. Project Supply & Technical Confirmation
ParameterSpecified valueUnit / standardEngineering verification
Input Current16 AAConfirm input supply, polarity and backup sizing against the project electrical design.
Input Cable3 m, 2.5 mm²mConfirm the current model revision in the final technical submittal before purchase order.
Input Plug16A Chinese-standard plug—Confirm the current model revision in the final technical submittal before purchase order.
Function ModuleSPD surge protection—Confirm the current model revision in the final technical submittal before purchase order.
Output8 × 16 A Chinese-standard outletsAConfirm the current model revision in the final technical submittal before purchase order.
Rated Load4000 WWConfirm the current model revision in the final technical submittal before purchase order.
Dimensions485 × 44.5 × 44.5 mmmmVerify against the approved drawing, opening direction and installation conditions.
ParameterSpecified valueUnit / standardEngineering verification
Website SKUSee documented configurations—Confirm the current model revision in the final technical submittal before purchase order.
Manufacturer modelSP5082—Confirm the current model revision in the final technical submittal before purchase order.
Product seriesSurge-Protected Rack PDU Series—Confirm the current model revision in the final technical submittal before purchase order.
Entity typeProduct group with selectable configurations—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
ModelSP5082SKUUse the exact model code on drawings, BOQ, quotation and purchase order.
Product familypdu-power-distributionCategoryConfirm the selected family matches the complete system architecture.
Typical applicationsNetwork racks, Security cabinets, Surge-protected equipment distributionApplicationValidate suitability against the actual site workflow and environment.
MOQConfirm by model and project quantityOrderConfirm by final model mix, finish and customization scope.
Lead timeConfirm after configuration reviewScheduleReconfirm after sample approval and before project delivery planning.
FOB portConfirm in project quotationIncotermConfirm Incoterm, destination and consolidation plan in the quotation.
OEM / ODMStandard supplySupplyConfirm logo, finish, packaging, labels, manuals and firmware scope where applicable.
RFQ confirmationConfirm the application, rack or room position, destination-market interface and mounting requirement.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm electrical, network, accessory or protection scope from the product family and project drawings.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm quantity, labeling, packing and required documents before purchase order.ProjectInclude this item in the technical clarification record.

Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.

Technical Confirmation & Project Supply

Move from the website record to a controlled technical clarification, exact configuration and commercial quotation without assuming unconfirmed certifications or performance data.

Controlled Source Record

Model / SKU
SP5082
Image evidence
4 bound source images
Technical data
Source values retained; final submittal required
Datasheet

SP5082 — Product Datasheet

Document language: English

Download DOCX5.5 MB
Series specifications

SP1182-2 + 5 models — Series Comparison

Document language: English

Download DOCX8.5 MB
Request Additional Documents

RFQ Technical Inputs

  • Confirm the application, rack or room position, destination-market interface and mounting requirement.
  • Confirm electrical, network, accessory or protection scope from the product family and project drawings.
  • Confirm quantity, labeling, packing and required documents before purchase order.

Quotation Handoff

Quantity basis
Confirm by model and project quantity
Schedule
Confirm after configuration review
Shipping term
Confirm in project quotation
Send Technical RFQ

Related Products in This Series

Compare source-bound product images and adjacent configurations from the same documented series before widening the selection.

Engineering Buyer FAQ

Source-controlled answers for model selection and RFQ preparation.

Provide the project application, cabinet or room layout, required interface, mounting condition, quantity and destination market for model confirmation.

Include the source SKU or target family, key specifications, installation environment, accessory scope, quantity, packing requirement and delivery destination.

Ready to Start Your Project?

Request a Model-Level Quotation for SP5082

Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.

Request Quotation

Send your model list, quantity and destination for a reviewed quotation.

Start RFQ

Download Datasheet

Full technical specs, dimensions and available model-level documents for tender prep.

Get Datasheet

Schedule a Call

Book a video call with our project engineer for technical discussion and site survey.

Book Now
CCTV Manufacturing & ELV Supply
Model-Level Documents
FOB China Main Ports
Catalog Chat