Source product views, construction details and diagrams are kept together as product evidence, not separate SKUs.
NexPro NYY 0.6/1 kV PVC Power Cable is supplied as a configurable low-voltage power cable product family. Catalog models are preserved exactly as NYY. Use the source-derived tables below to select the required conductor construction, core arrangement, cross-section and dimensions.
NYY - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.
Engineering data sheet
Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.
| Parameter | Specified value | Unit / standard | Engineering verification |
|---|---|---|---|
| Website SKU | nyy | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Catalog model | NYY | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Manufacturer models | NYY | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Cable category | Low-voltage power cable | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Publication status | Publish Ready Catalog | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Parameter | Specified value | Unit / standard | Engineering verification |
|---|---|---|---|
| Nominal voltage Uo/U | Specified value: | Value 2: [V] | Value 3: 600 / 1000 Volt | — | Confirm input supply, polarity and backup sizing against the project electrical design. |
| Test voltage | Specified value: | Value 2: [V]_{AC} | Value 3: 4000 | — | Confirm input supply, polarity and backup sizing against the project electrical design. |
| Temperature range | Specified value: in motion | Value 2: | Value 3: - 5°C till +70°C | — | Confirm the operating environment and required protection level for the installation site. |
| fixed | Specified value: | Value 2: -20°C till +70°C | Value 3: — | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Bending radius | Specified value: single-core style | Value 2: x diameter | Value 3: 15 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| multi-core style | Specified value: x diameter | Value 2: 12 | Value 3: — | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Flammability | Specified value: standard | Value 2: | Value 3: EN 60332-1-2 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Parameter | Specified value | Unit / standard | Engineering verification |
|---|---|---|---|
| Model | NYY | SKU | Use the exact model code on drawings, BOQ, quotation and purchase order. |
| Product family | cables-connectivity | Category | Confirm the selected family matches the complete system architecture. |
| Typical applications | Low-voltage distribution, Industrial power projects, Fixed and buried installations | Application | Validate suitability against the actual site workflow and environment. |
| MOQ | Confirm by cable type, size and length | Order | Confirm by final model mix, finish and customization scope. |
| Lead time | Confirm after specification review | Schedule | Reconfirm after sample approval and before project delivery planning. |
| FOB port | Confirm in project quotation | Incoterm | Confirm Incoterm, destination and consolidation plan in the quotation. |
| OEM / ODM | Standard supply | Supply | Confirm logo, finish, packaging, labels, manuals and firmware scope where applicable. |
| RFQ confirmation | Confirm conductor material and construction, core count and cross-section. | Project | Include this item in the technical clarification record. |
| RFQ confirmation | Confirm voltage/model, installation method and environmental conditions. | Project | Include this item in the technical clarification record. |
| RFQ confirmation | Confirm required length, drum or coil packing, quantity and destination requirements. | Project | Include this item in the technical clarification record. |
Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.
Multi-column source tables are preserved without flattening so engineers can compare the published conductor, construction, dimension and weight fields row by row.
| Parameter | Specified value | Value 2 | Value 3 |
|---|---|---|---|
| Nominal voltage Uo/U | [V] | 600 / 1000 Volt | |
| Test voltage | [V]_{AC} | 4000 | |
| Temperature range | in motion | - 5°C till +70°C | |
| fixed | -20°C till +70°C | — | |
| Bending radius | single-core style | x diameter | 15 |
| multi-core style | x diameter | 12 | — |
| Flammability | standard | EN 60332-1-2 |
| Number of cores and nominal cross section | Copper figure | Overall diameter | Weight | Current carrying capacity ground | Current carrying capacity air |
|---|---|---|---|---|---|
| mm^2 | kg/km | appr. mm | kg/km | A | A |
| 1 x 4 RE | 38,4 | 8 | 120 | 50 | 37 |
| 1 x 6 RE | 57,6 | 9 | 131 | 62 | 47 |
| 1 x 10 RE | 96,0 | 10 | 171 | 83 | 64 |
| 1 x 16 RE | 153,6 | 11 | 233 | 107 | 84 |
| 1 x 25 RM | 240,0 | 12 | 370 | 138 | 114 |
| 1 x 35 RM | 336,0 | 14 | 480 | 164 | 139 |
| 1 x 50 RM | 480,0 | 16 | 640 | 195 | 169 |
| 1 x 70 RM | 672,0 | 17 | 850 | 238 | 213 |
| 1 x 95 RM | 912,0 | 19 | 1.120 | 286 | 264 |
| 1 x 120 RM | 1.152,0 | 21 | 1.375 | 325 | 307 |
| 1 x 150 RM | 1.440,0 | 23 | 1.660 | 365 | 352 |
| 1 x 185 RM | 1.776,0 | 25 | 2.050 | 413 | 406 |
| 1 x 240 RM | 2.304,0 | 28 | 2.634 | 479 | 483 |
| 1 x 300 RM | 2.880,0 | 30 | 3.295 | 541 | 557 |
Selection note: use these source values for comparison and RFQ preparation. Final cable sizing, voltage/application suitability and installation design must be approved by the responsible project engineer.
Move from the website record to a controlled technical clarification, exact configuration and commercial quotation without assuming unconfirmed certifications or performance data.
Document language: English
Document language: English
Compare source-bound product images and adjacent configurations from the same documented series before widening the selection.
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource-controlled answers for model selection and RFQ preparation.
Confirm the exact model, voltage rating, conductor or core configuration, cross-section, installation conditions, required length and applicable project requirements in the RFQ.
Provide the catalog model, conductor or core configuration, cross-section, required length, installation conditions, quantity and destination.
Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.
Send your model list, quantity and destination for a reviewed quotation.
Start RFQFull technical specs, dimensions and available model-level documents for tender prep.
Get DatasheetBook a video call with our project engineer for technical discussion and site survey.
Book Now