NexPro-Link
OEM Available
NX-SL-2017 gallery view 1
NX-SL-2017 product view
NX-SL-2017

NexPro Smartphone App Fingerprint Password Smart Lock NX-SL-2017

A smartphone app, fingerprint, password, card, mechanical key smart door lock with zinc alloy, 304 stainless steel construction. Designed for apartment, commercial building, office access applications.

Product familySmart Door Locks
AccessSmartphone App / Fingerprint / Password
ApplicationApartment
  • 360° fingerprint recognition
  • Anti-peep password input
  • Virtual password support
  • IC card access
MOQConfirm by model mix and customization scope
Lead TimeConfirm after sample and project requirements review
FOB PortChina main ports
OEM/ODMYes
Request QuotationDownload Datasheet · DOCX

Full Specifications

NX-SL-2017 - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.

Engineering data sheet

NX-SL-2017 technical review record

Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.

Model / schedule code
NX-SL-2017
Product family
smart-lock
Typical application
Apartment / Commercial Building
Technical status
Final submittal required
1. Sensor2. Fingerprint3. Environmental4. Electrical5. Security6. Project Supply & Technical Confirmation
ParameterSpecified valueUnit / standardEngineering verification
Sensor resistance4H pencil, 20cm continuous 1000 impacts without damage—Confirm the current model revision in the final technical submittal before purchase order.
Sensor resolution500dp / 500dpi—Validate capacity against the final device count, retention target and system design.
Start time< 1 second seconds—Confirm the current model revision in the final technical submittal before purchase order.
Rejection rate<=1%—Confirm the current model revision in the final technical submittal before purchase order.
Fake admission rate<=0.0001%—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
Fingerprint capacity100 pieces—Validate capacity against the final device count, retention target and system design.
Comparison method1:N—Confirm the current model revision in the final technical submittal before purchase order.
Finger usage angle360 degrees °—Confirm the current model revision in the final technical submittal before purchase order.
Fingerprint registrationGenerate at once—Confirm the current model revision in the final technical submittal before purchase order.
Fingerprint updateAutomatic update—Confirm the current model revision in the final technical submittal before purchase order.
Data retentionNo loss due to power outage—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
Light interferenceAvoid direct sunlight—Confirm the operating environment and required protection level for the installation site.
Working temperature-10 to 55 C °C°CConfirm the operating environment and required protection level for the installation site.
Storage temperature-20 to 70 C °C°CConfirm the operating environment and required protection level for the installation site.
Working humidity10% to 90%—Confirm the operating environment and required protection level for the installation site.
ParameterSpecified valueUnit / standardEngineering verification
Battery lifeOpen the door 11000 times—Confirm input supply, polarity and backup sizing against the project electrical design.
Working voltageDC 6V—Confirm input supply, polarity and backup sizing against the project electrical design.
Power supplyBattery powered—Confirm input supply, polarity and backup sizing against the project electrical design.
Low pressure alarm4.9V—Confirm input supply, polarity and backup sizing against the project electrical design.
Backup powerPower bank or other mobile power supply—Confirm input supply, polarity and backup sizing against the project electrical design.
AntistaticContact discharge 8KV / Air discharge 15KV—Confirm input supply, polarity and backup sizing against the project electrical design.
ParameterSpecified valueUnit / standardEngineering verification
Code capacity100 sets pieces—Validate capacity against the final device count, retention target and system design.
Password designChange at will combination—Confirm the current model revision in the final technical submittal before purchase order.
Password length8 digits—Confirm the current model revision in the final technical submittal before purchase order.
ParameterSpecified valueUnit / standardEngineering verification
ModelNX-SL-2017SKUUse the exact model code on drawings, BOQ, quotation and purchase order.
Product familysmart-lockCategoryConfirm the selected family matches the complete system architecture.
Typical applicationsApartment, Commercial Building, Office Access, Rental PropertyApplicationValidate suitability against the actual site workflow and environment.
MOQConfirm by model mix and customization scopeOrderConfirm by final model mix, finish and customization scope.
Lead timeConfirm after sample and project requirements reviewScheduleReconfirm after sample approval and before project delivery planning.
FOB portChina main portsIncotermConfirm Incoterm, destination and consolidation plan in the quotation.
OEM / ODMAvailableSupplyConfirm logo, finish, packaging, labels, manuals and firmware scope where applicable.
RFQ confirmationConfirm door type in the RFQ.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm lock body type in the RFQ.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm finish color in the RFQ.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm quantity in the RFQ.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm branding requirement in the RFQ.ProjectInclude this item in the technical clarification record.
RFQ confirmationConfirm project country in the RFQ.ProjectInclude this item in the technical clarification record.

Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.

Manufacturing & quality evidence

How the Smart Locksupply scope is prepared and reviewed

Supplied smart-lock evidence covers product display, production line, automatic soldering, durability tests, motor detection and certificate document references.

Production and testing evidence available

  • Product display and production-line photos
  • Durability and motor test references
  • Certificate document images shown separately
Smart lock production line workstations for assembly reviewProduction line
Production-line workstation reference used to review smart-lock assembly and handling flow.
Smart lock product exhibition hall display with multiple lock modelsProduct display
Product exhibition hall reference showing multiple smart-lock and electronic-lock models for buyer review.
Automatic soldering machine used in smart lock electronics productionSoldering
Automatic soldering-machine reference for electronic lock module production and process review.

Photos supplied for this website are presented as source-facility evidence. Facility ownership and order-specific evidence scope are confirmed during supplier review.

View evidence status Request current evidence

Documents & Supply Hub

Everything you need before RFQ: technical documents, OEM/ODM scope and B2B supply essentials.

OEM / ODM Capabilities

  • Logo & brand customization
  • Label & packaging design
  • Color / housing option
  • Product-kit bundling
  • Software pre-configuration
  • App branding (white-label)
OEM/ODM Available for This Model

Project Supply Essentials

MOQConfirm by model mix and customization scope
Lead TimeConfirm after sample and project requirements review
FOB PortChina main ports
PaymentT/T, L/C at sight (project-dependent)
After-Sales1-3 years warranty (varies by model)
Send Project RFQ

Related Products in This Series

Compare real product images and adjacent models from the same lock series before widening the project selection.

Buyer FAQ

Model and category questions for system integrators, distributors and contractors preparing an RFQ.

Confirm door material, thickness, handing, existing lock-body dimensions, credential method, finish, emergency access and whether software or hotel management integration is required.

List the required card, keypad, fingerprint, Bluetooth or mobile workflow and the expected encoder, gateway or management software. Compatibility is confirmed for the selected system.

Yes. Send the equipment list, drawing or tender reference. The review can identify matching catalog models, related accessories and the model-level documents that are available for the selected scope.

List the required protocol, connector, voltage, software or system interface. Compatibility is checked against the selected model information and is recorded as a confirmation point before order approval.

Provide the target model, quantity, destination, logo position, label, manual language and packaging requirement. Available OEM scope and minimum quantity are confirmed per model in the quotation.

Commercial terms are confirmed for the exact model, quantity, destination and order stage. Use the issued quotation and order documents rather than a generic website statement.

Yes. Send the complete list and destination. Packing compatibility, carton grouping, document scope and the practical shipment method are reviewed before the order is confirmed.

Send the target market, tender clause and exact model list. Only documents that match the selected model and stated scope should be used for approval.

Need a model-specific answer? Send the product list for review.

Ready to Start Your Project?

Request a Model-Level Quotation for NX-SL-2017

Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.

Request Quotation

Send your model list, quantity and destination for a reviewed quotation.

Start RFQ

Download Datasheet

Full technical specs, dimensions and available model-level documents for tender prep.

Get Datasheet

Schedule a Call

Book a video call with our project engineer for technical discussion and site survey.

Book Now
CCTV Manufacturing & ELV Supply
Model-Level Documents
FOB China Main Ports
Catalog Chat