NX-HL-2031E - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.
Engineering data sheet
NX-HL-2031E technical review record
Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.
Confirm the current model revision in the final technical submittal before purchase order.
Card specs
ATMEL Temic induction card
—
Confirm protocol, credential and platform compatibility before sample approval.
Production process
Sheet metal insertion on PVC surface
—
Confirm the current model revision in the final technical submittal before purchase order.
System logic
Conflict prevention mechanism
—
Confirm the current model revision in the final technical submittal before purchase order.
Card reading
Non-contact induction type
—
Confirm protocol, credential and platform compatibility before sample approval.
Read/write
Read, write, and encrypt
—
Confirm the current model revision in the final technical submittal before purchase order.
Opening time
Press handle once after door opening; 7 seconds auto-lock
—
Confirm the current model revision in the final technical submittal before purchase order.
Unlock record
Store latest unlock record in lock loop
—
Validate capacity against the final device count, retention target and system design.
Parameter
Specified value
Unit / standard
Engineering verification
Applicable scope
Special lock for anti-theft doors, suitable for family, apartments, office buildings
—
Confirm protocol, credential and platform compatibility before sample approval.
Parameter
Specified value
Unit / standard
Engineering verification
Working voltage
6A / 4 knots high energy alkaline battery V
V
Confirm input supply, polarity and backup sizing against the project electrical design.
Static power consumption
< 30 microamperes
microamperes
Confirm input supply, polarity and backup sizing against the project electrical design.
Dynamic power consumption
Approximately 200 amps mA
mA
Confirm input supply, polarity and backup sizing against the project electrical design.
Undervoltage index
Below 4.8V still able to unlock >200 times
—
Confirm input supply, polarity and backup sizing against the project electrical design.
Battery life
Normal continuous opening over 10000 times
—
Confirm input supply, polarity and backup sizing against the project electrical design.
Parameter
Specified value
Unit / standard
Engineering verification
Storage capacity
32 bytes
—
Confirm the operating environment and required protection level for the installation site.
Parameter
Specified value
Unit / standard
Engineering verification
Installation
Conventional side strip 24x240 / 30x240, customized
—
Verify against the approved drawing, opening direction and installation conditions.
Parameter
Specified value
Unit / standard
Engineering verification
Model
NX-HL-2031E
SKU
Use the exact model code on drawings, BOQ, quotation and purchase order.
Product family
smart-lock
Category
Confirm the selected family matches the complete system architecture.
Typical applications
Residential, Apartment, Commercial Building
Application
Validate suitability against the actual site workflow and environment.
MOQ
Confirm by model mix and customization scope
Order
Confirm by final model mix, finish and customization scope.
Lead time
Confirm after sample and project requirements review
Schedule
Reconfirm after sample approval and before project delivery planning.
FOB port
China main ports
Incoterm
Confirm Incoterm, destination and consolidation plan in the quotation.
OEM / ODM
Available
Supply
Confirm logo, finish, packaging, labels, manuals and firmware scope where applicable.
RFQ confirmation
Confirm door type in the RFQ.
Project
Include this item in the technical clarification record.
RFQ confirmation
Confirm lock body type in the RFQ.
Project
Include this item in the technical clarification record.
RFQ confirmation
Confirm finish color in the RFQ.
Project
Include this item in the technical clarification record.
RFQ confirmation
Confirm quantity in the RFQ.
Project
Include this item in the technical clarification record.
RFQ confirmation
Confirm branding requirement in the RFQ.
Project
Include this item in the technical clarification record.
RFQ confirmation
Confirm project country in the RFQ.
Project
Include this item in the technical clarification record.
Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.
Manufacturing & quality evidence
How the Smart Locksupply scope is prepared and reviewed
Supplied smart-lock evidence covers product display, production line, automatic soldering, durability tests, motor detection and certificate document references.
Production and testing evidence available
Product display and production-line photos
Durability and motor test references
Certificate document images shown separately
Production line
Production-line workstation reference used to review smart-lock assembly and handling flow.
Product display
Product exhibition hall reference showing multiple smart-lock and electronic-lock models for buyer review.
Soldering
Automatic soldering-machine reference for electronic lock module production and process review.
Photos supplied for this website are presented as source-facility evidence. Facility ownership and order-specific evidence scope are confirmed during supplier review.
Model and category questions for system integrators, distributors and contractors preparing an RFQ.
Confirm door material, thickness, handing, existing lock-body dimensions, credential method, finish, emergency access and whether software or hotel management integration is required.
List the required card, keypad, fingerprint, Bluetooth or mobile workflow and the expected encoder, gateway or management software. Compatibility is confirmed for the selected system.
Yes. Send the equipment list, drawing or tender reference. The review can identify matching catalog models, related accessories and the model-level documents that are available for the selected scope.
List the required protocol, connector, voltage, software or system interface. Compatibility is checked against the selected model information and is recorded as a confirmation point before order approval.
Provide the target model, quantity, destination, logo position, label, manual language and packaging requirement. Available OEM scope and minimum quantity are confirmed per model in the quotation.
Commercial terms are confirmed for the exact model, quantity, destination and order stage. Use the issued quotation and order documents rather than a generic website statement.
Yes. Send the complete list and destination. Packing compatibility, carton grouping, document scope and the practical shipment method are reviewed before the order is confirmed.
Send the target market, tender clause and exact model list. Only documents that match the selected model and stated scope should be used for approval.
Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.
Production line
Product display
Soldering
Same product familyOEM
Same product familyOEM
Same product familyOEM
Same product familyOEM
Same product familyOEM
Same product familyOEM
Same product familyOEM
Same product familyOEM