NexPro NHXH E90 Halogen-Free Fire-Resistant Cable is supplied as a configurable fire-resistant safety cable product family. Catalog models are preserved exactly as NHXH E90. Use the source-derived tables below to select the required conductor construction, core arrangement, cross-section and dimensions.
NHXH E90 - structured technical parameters for engineering evaluation, RFQ clarification and tender documentation.
Engineering data sheet
Source specifications are retained as published. Verification notes identify what an engineer should confirm against drawings, system architecture and the final quotation before purchase order.
| Parameter | Specified value | Unit / standard | Engineering verification |
|---|---|---|---|
| Website SKU | nhxh-e90 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Catalog model | NHXH E90 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Manufacturer models | NHXH E90 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Cable category | Fire-resistant safety cable | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Publication status | Publish Ready Catalog | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Parameter | Specified value | Unit / standard | Engineering verification |
|---|---|---|---|
| Test voltage | Column 2: | [V]: [V]_{AC} | 600 / 1000 Volt: 4000 | — | Confirm input supply, polarity and backup sizing against the project electrical design. |
| Temperature range | Column 2: in motion | [V]: | 600 / 1000 Volt: -5°C till +90°C | — | Confirm the operating environment and required protection level for the installation site. |
| Operating temperature | Column 2: short circuit | [V]: °C | 600 / 1000 Volt: 250 | °C | Confirm the operating environment and required protection level for the installation site. |
| Short circuit time | Column 2: max. | [V]: [sec] | 600 / 1000 Volt: 5 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Bending radius | Column 2: single core style | [V]: x diameter | 600 / 1000 Volt: 15 | — | Confirm the current model revision in the final technical submittal before purchase order. |
| multi core style | Column 2: x diameter | [V]: 12 | 600 / 1000 Volt: — | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Flammability | Column 2: standard | [V]: | 600 / 1000 Volt: EN 50266-2-4IEC 60332-3 Kat.C | — | Confirm the current model revision in the final technical submittal before purchase order. |
| Parameter | Specified value | Unit / standard | Engineering verification |
|---|---|---|---|
| Model | NHXH E90 | SKU | Use the exact model code on drawings, BOQ, quotation and purchase order. |
| Product family | cables-connectivity | Category | Confirm the selected family matches the complete system architecture. |
| Typical applications | Public buildings, Emergency circuits, Low-smoke installation projects | Application | Validate suitability against the actual site workflow and environment. |
| MOQ | Confirm by cable type, size and length | Order | Confirm by final model mix, finish and customization scope. |
| Lead time | Confirm after specification review | Schedule | Reconfirm after sample approval and before project delivery planning. |
| FOB port | Confirm in project quotation | Incoterm | Confirm Incoterm, destination and consolidation plan in the quotation. |
| OEM / ODM | Standard supply | Supply | Confirm logo, finish, packaging, labels, manuals and firmware scope where applicable. |
| RFQ confirmation | Confirm conductor material and construction, core count and cross-section. | Project | Include this item in the technical clarification record. |
| RFQ confirmation | Confirm voltage/model, installation method and environmental conditions. | Project | Include this item in the technical clarification record. |
| RFQ confirmation | Confirm required length, drum or coil packing, quantity and destination requirements. | Project | Include this item in the technical clarification record. |
Engineering note: Website data supports preliminary selection and RFQ preparation. Final voltage, interfaces, drawings, dimensions, environmental rating, accessories and firmware revision must be confirmed in the approved technical submittal.
Multi-column source tables are preserved without flattening so engineers can compare the published conductor, construction, dimension and weight fields row by row.
| Nominal voltage Uo/U | Column 2 | [V] | 600 / 1000 Volt |
|---|---|---|---|
| Test voltage | [V]_{AC} | 4000 | |
| Temperature range | in motion | -5°C till +90°C | |
| Operating temperature | short circuit | °C | 250 |
| Short circuit time | max. | [sec] | 5 |
| Bending radius | single core style | x diameter | 15 |
| multi core style | x diameter | 12 | — |
| Flammability | standard | EN 50266-2-4IEC 60332-3 Kat.C |
| Number of cores and nominal cross section mm^2 | Copper figure kg/km | Overall diameter appr.mm | Calorific potential kWh/m | Weight appr. kg/km |
|---|---|---|---|---|
| 1 x 16 RM | 160 | 10,5 | 0,42 | 250 |
| 1 x 25 RM | 250 | 12,5 | 0,53 | 355 |
| 1 x 35 RM | 350 | 13,5 | 0,60 | 460 |
| 1 x 50 RM | 500 | 15,0 | 0,69 | 596 |
| 1 x 70 RM | 700 | 16,5 | 0,83 | 810 |
| 1 x 95 RM | 950 | 19,0 | 1,06 | 1.100 |
| 1 x 120 RM | 1.200 | 20,5 | 1,15 | 1.350 |
Selection note: use these source values for comparison and RFQ preparation. Final cable sizing, voltage/application suitability and installation design must be approved by the responsible project engineer.
Move from the website record to a controlled technical clarification, exact configuration and commercial quotation without assuming unconfirmed certifications or performance data.
Document language: English
Document language: English
Compare source-bound product images and adjacent configurations from the same documented series before widening the selection.
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog model
Source catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource catalog modelSource-controlled answers for model selection and RFQ preparation.
Confirm the exact model, voltage rating, conductor or core configuration, cross-section, installation conditions, required length and applicable project requirements in the RFQ.
Provide the catalog model, conductor or core configuration, cross-section, required length, installation conditions, quantity and destination.
Send your project requirements or BOM list. The team reviews the selected model, quantity, destination and customization scope, then confirms quotation timing.
Send your model list, quantity and destination for a reviewed quotation.
Start RFQFull technical specs, dimensions and available model-level documents for tender prep.
Get DatasheetBook a video call with our project engineer for technical discussion and site survey.
Book Now